Important information For smoothly running systems
To offer you the greatest possible planning security, you will find information on current phase-outs listed chronologically and thematically below. We strongly recommend the modification to modern systems or products in order to keep your plant at the state of the art.
Discontinued Service
Since 2005, the manufacturer Siemens has been phasing out the SIMATIC S5-115/135, and now, as from October 2015, no further spare parts will be available for this automation technology. For us this means that we will no longer be able to offer any service, software modifications or system upgrades for this technology. The same applies to the PLC-5 control system from Rockwell (formerly Allen-Bradley), which is also being phased out.
We therefore recommend that you arrange for all the affected control systems in your plant to be converted to current system technology in good time. Our Siempelkamp specialists operating around the world will advise you individually on which systems are optimally suited to your specific plants. You will then be able to guarantee plant availability and rest assured that your plant will run quickly and above all efficiently after the conversion.
In 2010, Siemens announced the product phase-out of the MASTERDRIVES system with complete discontinuation of component supply and technical support in the year 2020. In the remaining time, we will be able to continue the supply and repair of components for MASTERDRIVES systems.
We do recommend timely migration to the new SINAMICS/SIMOTION drive series by 2020 at the latest as not only the delivery times are getting longer and prices for the MASTERDRIVES parts are rising but also the demand for our individual retrofit packages is growing.
SINAMICS/SIMOTION provides you with an innovative drive system with extended modularity and functionality that operates just as reliably as the MASTERDRIVE system.
Your benefits:
Retrofits by the very experienced SLS conversion specialists, who have already successfully carried out this installation many times
Short retrofit periods and downtimes: switch off – convert – switch on – resume production
Retrofits of all the required machine protection equipment to the new technology, including the systems for monitoring speed differential (Delta-v) and slippage. This is of crucial importance because external solutions do not take account of these aspects so that it is only a matter of time before damage occurs to plant components requiring heavy investment such as the ContiRoll® steel belt.
Discontinued Components
1. Drive technology
Description: DC rectifier | Supplier: AEG / ABB | Machine: ContiRoll® Gen. 1...5 Delivered: 1987–1993 Discontinued since: ~ 2000 Spare part availability: no End of support / spare part availability: 2005 Upgrade package: Sinamics / Simotion
Description: ATR-inverter | Supplier: ATR | Machine: ContiRoll® Gen. 4...6 multi opening presses Delivered: 1993–1998 Discontinued since: 2004 Spare part availability: no End of support / spare part availability: 2007 Upgrade package: Sinamics / Simotion
Description: Indramat motors and drives | Supplier: Rexroth (Indramat) | Machine: double diagonal saw Delivered: 1991–1999 Discontinued since: 2006 Spare part availability: no End of support / spare part availability: 2013 Upgrade package: Siemens / Simotion
Description: Hydraulic control | Supplier: Rexroth | Machine: ContiRoll® Gen. 6…6+, short cycle presses Delivered: 2000–2008 Discontinued since: 2011 (-2X) Spare part availability: no End of support / spare part availability: 2012 Upgrade package: VT-HNC100-3X (Short cycle presses) or Simotion (ContiRoll®)
Description: Siemens asynchronous motors | Supplier: Siemens | Machine: ContiRoll® Gen. 6..6++ Delivered: 1999–2013 Discontinued since: 2013 Spare part availability: no End of support / spare part availability: 2002 Upgrade package: 1PH8 motor
Description: Siemens inverter | Supplier: Siemens | Machine: ContiRoll® Gen. 5...6++ multi opening presses Delivered: 1997–2008 Discontinued since: 2011 Spare part availability: no End of support / spare part availability: 2019 Upgrade package: Sinamics / Simotion
Description: Drive / hydraulic control | Supplier: Siemens | Machine: ContiRoll® Gen. 6…6+ multi opening presses Delivered: 1998–2008 Discontinued since: 2011 Spare part availability: no End of support / spare part availability: 2020 Upgrade package: Simotion
Description: Drive / hydraulic control | Supplier: Rockwell | Machine: ContiRoll® Gen. 6…6++ multi daylight presses Delivered: 2000–2024 Discontinued since: 2024 Spare part availability: no End of support / spare part availability: 2024 Upgrade package: on request
2. Process technology
Description: Process control | Supplier: MTS | Machine: ContiRoll® Gen. 6…6++ Delivered: 1994–2020 Discontinuation: 18 September 2020 Spare part availability: Last-buy date 18 September 2020, subject to availability, afterwards possibly remaining stocks End of support / spare part availability: 18 September 2020 Upgrade package: Option of an electrical conversion
Description: Process control | Supplier: MTS | Machine: ContiRoll® Gen. 6...6++ Delivered: 1994–2019 Discontinued since: 29 November 2019 Spare part availability: Last-buy date 29 November 2019, afterwards residual stocks only End of support / spare part availability: 29 November 2019 Upgrade package: Conversion to new evaluation circuit
Description: Process control | Supplier: MTS | Machine: ContiRoll® Gen. 6...6++ Delivered: 1994–2018 Discontinued since: 30 June 2018 Spare part availability: Last-buy date 31 May 2017, afterwards residual stocks only End of support / spare part availability: 30 June 2018 Upgrade package: Conversion to new evaluation circuit
Description: Process control | Supplier: Emerson (Motorola) | Machine: ContiRoll® Gen. 6 Delivered: 1994–1998 Discontinued since: 2006 Spare part availability: no End of support / spare part availability: 2010 Upgrade package: SPS (S7 or CLX) VME Gen. II
Description: Process control | Supplier: Emerson (Motorola) | Machine: ContiRoll® Gen. 6+ ff. Delivered: 1999–2005 Discontinued since: 2006 Spare part availability: no End of support / spare part availability: 2010 Upgrade package: SPC Gen. 9
Description: Process control | Supplier: Emerson (Motorola) | Machine: ContiRoll® Gen. 6+ ff. Delivered: 2005–2017 Discontinued since: 2019 Spare part availability: limited quantity available, only on request Upgrade package: SPC Gen. 9
Description: Process control | Supplier: Phoenix | Machine: ContiRoll® Gen. 6 Delivered: 2005–2017 Discontinued since: 31 December 2017 Spare part availability: Last-buy date 31 October 2017, afterwards residual stocks only End of support / spare part availability: 2017 Upgrade package: Conversion to ProfiNet
Description: Process control | Supplier: Motorola | Machine: ContiRoll® Gen. 1–5 Delivered: 1987–1994 Discontinued since: 1998 Spare part availability: no End of support / spare part availability: 2002 Upgrade package: SPS (S7 or CLX)
Description: Network communication between PLC and SPC | Supplier: HMS Networks | Machine: all ContiRoll® Delivered: 2010–2024 Discontinued since: 2024 Spare part availability: no End of support / spare part availability: 2024 Upgrade package: SPC G9
3. Control technology
Description: Networking (H1, Interchange) | Supplier: Allied Telesyn | Machine: ContiRoll® Gen. 6…6+ Delivered: 1997–2002 Discontinued since: 2005 Spare part availability: no End of support / spare part availability: 2005 Upgrade package: CAT5 / 7-networking
Description: HIMA safety control | Supplier: HIMA | Machine: ContiRoll® Gen. 6 Delivered: 1994–1998 Discontinued since: 1999 Spare part availability: no End of support / spare part availability: 2006 Upgrade package: SPS (S7 or CLX) VME Gen. II
Description: PLC5 SPS System | Supplier: Rockwell (Allen-Bradley) | Machine: ContiRoll® Gen. 3…6+ multi opening presses, short cycle presses Delivered: 1990–2005 Discontinued since: 2006 Spare part availability: no End of support / spare part availability: 2012 Upgrade package: ControlLogix (CLX)
Description: S5 SPS system | Supplier: Siemens | Machine: ContiRoll® Gen. 1…6+ multi opening presses, short cycle presses Delivered: 1987–1999 Discontinued since: 2002 Spare part availability: no End of support / spare part availability: 2010 Upgrade package: PLC S7
Discontinued Software
Visualizations
Description: Visualization | Supplier: ATR | Machine: ContiRoll® Gen. 5…6+ multi opening presses Delivered: 1994–1999 Discontinued since: 2002 Spare part availability: no End of support / spare part availability: 2004 (Hardware) Upgrade package: FactoryTalkView, InTouch, WinCC
Description: Visualization | Machine: ContiRoll® Gen. 5…6+, multi opening presses, short cycle presses Delivered: 2000–2005 Discontinued since: 2002 Spare part availability: no End of support: 2018 Upgrade package: Windows 10 with FactoryTalkView, InTouch, WinCC
Description: Visualization with Windows XP operating system | Machine: ContiRoll® Gen. 6…6++, multi opening presses, short cycle presses Delivered: 2005–2015 Discontinued since: 2014 Spare part availability: no End of support: 2018 Upgrade package: Windows 10 with FactoryTalkView, InTouch, WinCC
